By proceeding, I agree that I understand the following disclosures:
I. How We Work in Washington. Based on your preferences, we provide you with information about one or more of our contracted senior living providers ("Participating Communities") and provide your Senior Living Care Information to Participating Communities. The Participating Communities may contact you directly regarding their services. APFM does not endorse or recommend any provider. It is your sole responsibility to select the appropriate care for yourself or your loved one. We work with both you and the Participating Communities in your search. We do not permit our Advisors to have an ownership interest in Participating Communities.
II. How We Are Paid. We do not charge you any fee – we are paid by the Participating Communities. Some Participating Communities pay us a percentage of the first month's standard rate for the rent and care services you select. We invoice these fees after the senior moves in.
III. When We Tour. APFM tours certain Participating Communities in Washington (typically more in metropolitan areas than in rural areas.) During the 12 month period prior to December 31, 2017, we toured 86.2% of Participating Communities with capacity for 20 or more residents.
IV. No Obligation or Commitment. You have no obligation to use or to continue to use our services. Because you pay no fee to us, you will never need to ask for a refund.
V. Complaints. Please contact our Family Feedback Line at (866) 584-7340 or
[email protected] to report any complaint. Consumers have many avenues to address a dispute with any referral service company, including the right to file a complaint with the Attorney General's office at: Consumer Protection Division, 800 5th Avenue, Ste. 2000, Seattle, 98104 or 800-551-4636.
VI. No Waiver of Your Rights. APFM does not (and may not) require or even ask consumers seeking senior housing or care services in Washington State to sign waivers of liability for losses of personal property or injury or to sign waivers of any rights established under law.I agree that: A.I authorize A Place For Mom ("APFM") to collect certain personal and contact detail information, as well as relevant health care information about me or from me about the senior family member or relative I am assisting ("Senior Living Care Information"). B.APFM may provide information to me electronically. My electronic signature on agreements and documents has the same effect as if I signed them in ink. C.APFM may send all communications to me electronically via e-mail or by access to an APFM web site. D.If I want a paper copy, I can print a copy of the Disclosures or download the Disclosures for my records. E.This E-Sign Acknowledgement and Authorization applies to these Disclosures and all future Disclosures related to APFM's services, unless I revoke my authorization. You may revoke this authorization in writing at any time (except where we have already disclosed information before receiving your revocation.) This authorization will expire after one year. F.You consent to APFM's reaching out to you using a phone system than can auto-dial numbers (we miss rotary phones, too!), but this consent is not required to use our service.
*If I am consenting on behalf of someone else, I have the proper authorization to do so. By clicking Get My Results, you agree to our
Privacy Policy. You also consent to receive calls and texts, which may be autodialed, from us and our customer communities. Your consent is not a condition to using our service. Please visit our
Terms of Use. for information about our privacy practices.
I have had this type of jar opener for years! I have no grip strength due to permanent damage from a bicycle accident. I would be lost without this type of jar opener.
Same issue with liquid body soap... now I use Ivory which has a hand pump.
Still experimenting with hair shampoo trying to find something more senior friendly and works well on my hair. Had to give up my favorite OGX [small round turquoise blue bottle] loved the richness and smell of that shampoo because the bottle was just too hard to squeeze :(
Reading these posts I am reminded of a time I was in a hotel and had bought a new mouse for my laptop. It was impossible to get it open with my fingers it was so well wrapped with hard plastic but I had a pair of nail clippers in my purse and clipped away until i could open it which took me quite a while and was very frustrating. Thinking about it, it would have been smarter to go down to the desk and see if they has scissors.
Wish companies would make easier to open toilet cleaning products. Squeezing the tabs on either side of the bottle top is becoming harder and harder as I get older. And the vice grips are becoming harder to use.
I have noticed that the lids on everything have become incredibly shallow, making them harder to grip and open.
I am grateful to see more items being packaged in bags. Scissors can solve that challenge.
Because of that they are required to put the meds in a "child proof" bottle. They can send a regular cap with the order but they can not put it on the bottle.
The most frustrating one is my bottle of Synthroid. It is a tiny sort of square bottle with a small cap. On the bottle neck are sorta like "wings" that protrude out and you are supposed to squeeze the cap while turning the cap. I can NEVER get the cap off. I have resorted to trying to cut the wings off, they have a nub on them that catches the cap. I use nail clippers to do that. Sometimes I can not get it cut close enough so I am left with a wing that I can't cut back cuz it is so small the clippers can't grip it.
I have taken a serrated knife and cut the entire top of the bottle off and then I have to pour that med into another bottle. (won't get into the time when I cut my finger deeply with the knife!)
Then to contend with the plastic/foil that is on the bottle, that stuff is darn near impossible to tear.
AND...once I get the bottle open there is one of the moisture absorbing plastic "things" that is just a hair lash smaller in diameter than the opening of the bottle so I have to get that out so I can get the pills out.
No wonder one of the meds is for BP!
I suppose the good thing is I have not had to purchase cotton balls for years because 6 yards of the stuff comes in each bottle with each supplement I buy.
I have pliers - needle nose and slip joint in my kitchen drawers. They help with some things like bottle or carton caps that are too tight.. Years ago the kids were told to always put my needle nose pliers back or they got me a new pair for Christmas Guess what? Yeah, pretty well every Christmas.
Breaking the seal on jars in usually relatively easy for me. I have an implement I use to pry open the lid a little and the seal breaks. Apart from that the hot water trick works and or banging the jar up side down on the edge of the sink or counter. But I once broke jar that way so that is my last resort.
OTC meds sealed in a blister pack type of thing can annoy me. Some are easy to pop out, others need scissors every time. And child proof containers can be a challenge. I think I finally have the pharmacy trained to not use those for me, but other things come similarly packaged.
Ziplock type bags with the indentation showing where to cut can drive me mad. I inevitably miss the sweet spot and have to trim the top more. Then there isn't enough edge to grab to open the bag. The seal on a bag of three Romaine hearts can be a pain to open. Usually I end up cutting it off.
And they call these improvements. Don't get me started on the size of, for example, supplement or pill bottles compared to their contents. Sometimes I order two of the same that I use regularly and dump one into the other.
https://www.amazon.com/Jar-Openers-Multi-Purpose-Reusable-Stainless/dp/B09XHSHG7P/ref=sr_1_153_sspa?gclid=EAIaIQobChMI07a82pbW_AIVdhvUAR3Cow2QEAAYASAAEgIGWfD_BwE&hvadid=397075555588&hvdev=t&hvlocphy=9028940&hvnetw=g&hvqmt=e&hvrand=6126981613838855159&hvtargid=kwd-371389380449&hydadcr=28522_10703235&keywords=the+best+jar+opener&qid=1674218979&sr=8-153-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWFJTWEdQN1FQNjYwJmVuY3J5cHRlZElkPUEwNDMzNDcyMkRKTFc3TTQ3SUlOOSZlbmNyeXB0ZWRBZElkPUEwMTk1NTMyM08zOVYwVVdHRFFVOCZ3aWRnZXROYW1lPXNwX210ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Here is another one open up to 4" lid!
https://www.amazon.com/Kichwit-Adjustable-Jar-Opener-Arthritis/dp/B071V3G23Y/ref=sw_img_sspa_dk_huc_pt_expsub_7?_encoding=UTF8&pd_rd_i=B071V3G23Y&pd_rd_w=wYnge&content-id=amzn1.sym.421156cc-ae17-4608-955b-a8d126cb098e&pf_rd_p=421156cc-ae17-4608-955b-a8d126cb098e&pf_rd_r=S0XEPPXAX2BAD0M7BXT0&pd_rd_wg=bmgHq&pd_rd_r=c27538bf-e471-490e-bf50-2e15dc8fd32f&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExSjJMTVo3OEQzSEhOJmVuY3J5cHRlZElkPUExMDI0MzU1S0tYUE43SUJOQVlEJmVuY3J5cHRlZEFkSWQ9QTA1Nzg3MTYxMzhUMTlGRFExNDRRJndpZGdldE5hbWU9c3BfaHVjX21yYWkmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
https://smile.amazon.com/OXO-Good-Grips-Opener-Base/dp/B002DWA6KM/
Plop the pad on the counter, put the jar on the pad and use the tool like wrench. The pad is surprisingly good at holding the jar still.
I’ve used it on everything from Perrier bottles to the Costco sized Parmesan cheese containers.
The teeth can chew up plastic lids sometimes so watch out for scratchy bits on reusable containers if you have thin skin.
What worked, finally (no it wasn't calling my neighbor, the hulk😁😁), was inverting the bottle under running hot, hot, water over the seal for a minute or two. That was what my mom did, and rapping the lid on the edge of the counter to break the seal. I wouldn't do that, might chip the counter top! But using a utensil to tap the lid sometimes works.
I'm afraid to ask what's going on with your dish soap bottles down there, I haven't run into any difficult safety features on those yet.
It takes R&D and $$$ to change packaging (which is often outsourced) so companies need to really have a good reason to invest in a change.
My favorite tool is the cheap disposable plastic box cutters with the push-up blades. I don't know what I'd do without those.
Jars can be depressurized, so sticking a spoon under the lid to loosen the cap and allowing the air to move will make turning the lid a lot easier.
My personal roadblock is my plastic Pellegrino bottles... oy, those caps.